☎ (805) 396-9984

Simi Valley's Trusted Metal Fabrication Experts

Simi Valley presents a unique combination of wide suburban lots, hilltop estates, and fire-adjacent open land that makes quality metal fabrication not just a cosmetic choice — it's a practical one. From the manicured golf-course homes of Wood Ranch to the elevated properties overlooking the Reagan Library, Legendary Metal Works Inc. has been building custom metalwork worthy of this community since 2000.

Three generations of family craftsmanship and 500+ completed projects mean we understand the full range of Simi Valley's character: the HOA-governed planned communities of Big Sky and Madera that demand architectural precision, the hillside properties near Simi Hills that benefit from non-combustible metal perimeter fencing as a fire defense layer, and the classic family neighborhoods of West Simi and Strathearn where curb appeal and security go hand in hand. Our Ventura fabrication shop is just 25 minutes away — close enough for fast service, built with the care of a neighborhood craftsman.

Simi Valley's dry-heat climate and position within Southern California's wildfire corridor make metal fencing an especially smart investment. Unlike wood, steel and wrought iron do not ignite, warp, or decay. A well-designed metal fence creates a non-combustible perimeter barrier that holds up through summer fire season and outlasts any wooden alternative by decades — all while looking far more distinguished.

Our Services in Simi Valley Include:

  • Motorized Driveway Gates — Automated swing and sliding gates sized for Simi Valley's wider suburban driveways and estate entrances
  • Fire-Resistant Metal Fencing — Non-combustible steel and wrought iron perimeter fencing ideal for hillside and fire-zone properties
  • Custom Railings — Interior staircase, deck, and porch railings for two-story family homes throughout the valley
  • Metal Front Doors — Bold iron and steel entry doors that elevate curb appeal and security
  • Side & Pedestrian Gates — Secure access gates for backyards, side yards, and pool enclosures
  • Balcony & Deck Railings — Code-compliant railings for second-floor decks with hillside views
  • Custom Metal Fabrication — One-of-a-kind metal projects designed around your property and vision
Get a Free Estimate in Simi Valley
Why Simi Valley Homeowners Choose Us

The Legendary Difference

25+

Years in Business

Founded in 2000, Legendary Metal Works has spent over 25 years mastering the craft across three generations. That depth of experience shows in every weld and finish.

500+

Projects Completed

Over 500 custom metalwork projects across Ventura County — from single side gates to full estate entrances. We've seen every site condition and solved every challenge.

Local & Permit-Ready

Based 25 minutes from Simi Valley in Ventura. We know Simi Valley's building codes and handle all permits, inspections, and HOA submittals in-house — no extra hassle for you.

$0

Free On-Site Estimates

We come to your Simi Valley property, measure everything precisely, and deliver a detailed written estimate at no cost and no obligation. CA Lic #1119503.

Simi Valley Neighborhoods We Serve

Custom Metalwork Across Simi Valley

From the planned golf communities of Wood Ranch to the hillside open spaces of Simi Hills — we serve every corner of the valley.

Simi Valley Proper

Wood Ranch

Big Sky

Madera

Simi Hills

West Simi

Strathearn

Santa Susana

FAQ

Frequently Asked Questions — Simi Valley

How much does a driveway gate cost in Simi Valley?
Most Simi Valley driveway gate projects range from $8,000 to $35,000 depending on driveway width, material selection (wrought iron, steel, aluminum), gate style, and the automation system. Estate properties in Wood Ranch or Simi Hills with wider openings and custom ornamental designs typically fall toward the higher end. We provide free on-site estimates with a fully detailed written quote — no surprises.
How long does a metal gate or railing project take?
Most Simi Valley residential projects take 6 to 10 weeks from signed agreement to completed installation — covering design, fabrication at our Ventura shop, permit processing, and on-site installation. If your project requires HOA architectural review, budget an additional 1–2 weeks for that process. We provide a clear project timeline at the estimate stage so you always know where things stand.
Are you licensed to work in Simi Valley?
Yes. Legendary Metal Works Inc. holds California Contractor License #1119503 and is fully licensed, bonded, and insured to perform metalwork and structural installations throughout Ventura and Los Angeles counties, including Simi Valley. You can verify our license status at the California Contractors State License Board (CSLB) website.
Do I need a permit for a gate or fence in Simi Valley?
Yes. The City of Simi Valley requires building permits for motorized driveway gates and fencing that exceeds certain height thresholds. We manage the entire permitting process — applications, plan submissions, and final inspections — on your behalf. Our familiarity with Simi Valley's building department means fewer delays and faster approvals.
Can metal fencing help protect my property from wildfires?
Absolutely. Unlike wood fencing, steel and wrought iron do not ignite, making them the preferred perimeter choice for Simi Valley properties in fire-prone zones, hillside areas, and high fire hazard severity zones (HFHSZ). Metal fencing creates a non-combustible barrier that can slow fire spread and is often viewed favorably by homeowners insurance carriers in wildfire-risk areas. It's one of the most practical upgrades a Simi Valley hillside homeowner can make.
Do you work with HOA guidelines in Wood Ranch and Big Sky?
Yes. We regularly design gates and fencing that comply with HOA CC&Rs in Wood Ranch, Big Sky, Madera, and other Simi Valley planned communities. Before finalizing any design, we review your association's architectural standards and can prepare complete submittal packages — drawings, material specs, and finish samples — for your HOA review board. Our goal is to get your project approved on the first submission.
How far is your shop from Simi Valley?
Our fabrication shop is located at 4882 McGrath St, Unit 110, Ventura, CA 93003 — approximately 25 minutes from central Simi Valley via the 118 Freeway. We serve Simi Valley on a regular schedule and can arrange consultations, site visits, and installations throughout the week. Call us at (805) 396-9984 to set up your free estimate.

Ready to Start Your Simi Valley Project?

Call (805) 396-9984 or book online for a free on-site estimate. Mon–Fri 8AM–5:30PM, Sat 9AM–1PM.